Basic Uses
GUIBAO MS558 window and door sealant is specially formulated for
- Perimeter seal for aluminum, PVC, wood, steel and other windows and doors
- Used to seal the joints between doors & windows and walls
Features
- One part, neutral cure, excellent adhesion to a wide variety of substrates.
- Paintable after curing, compatible with suitable paint systems, good decorative effects.
- Non-staining
- Excellent UV resistance
Colours
GUIBAO MS558 is available in white and gray.
Packaging
GUIBAO MS558 is available in sausages (net 500ml).
Specifications
GUIBAO MS558 is designed to meet or even exceed the requirements of GB/T 14683-2017.
Storage and Shelf Life
GUIBAO MS558 should be stored in original unopened containers. It has a shelf life of 9 months from the date of manufacture.
Typical Properties
Test |
Property |
Unit |
Result |
As supplied-tested at 25ºC, 50% relative humidity |
Flow, Sag or Slump |
|
Nil |
Tack Free Time |
|
|
Black, Gray, White |
mins |
60 |
As cured-after 7 days at 25ºC, 50% relative humidity |
Durometer Hardness, Shore A |
|
|
Black, Gray, White |
Points |
34 |
ASTMD412 Ultimate Tensile Strength |
MPa |
1.0 |
Temperature Stability |
ºC |
-20 to 120 |
Movement Capability |
% |
±20 |
ASTM C1135 Tensile Adhesion Strength |
|
|
At 60% Extension |
Psi(MPa) |
89(0.6) |
Elongation at Break |
% |
110 |
*These values could not be used as products standards.
Surface Preparation
Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, surface dirt, protective coatings.
Application Method
Install back-up materials or joint fillers, setting blocks, spacer shims, and tapes. Mask areas adjacent to joints to ensure neat sealant lines.
Apply GUIBAO MS558 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the backing materials and joint surfaces. Remove masking tape as soon as the bead is tooled.
Limitations
GUIBAO MS558 should not be applied:
- As structural sealant.
- To the materials that bleed oils , plasticizers or solvents, such as impregnated wood, oil-based caulks.
- In totally confined spaces as sealant requires atmospheric moisture for cure.
- To frost laden or damp surfaces.
- For continuous water immersion.
- When surface temperature below 4ºC or over 50ºC.
Safety Information
- GUIBAO MS558 is a chemical product, not edible, no implantation into body and should be kept away from children.
- Cured sealant can be handled without any risk to health.
- Should uncured sealant contact with eyes, rinse thoroughly with water and seek medical treatment if irritation persists.
- Avoid prolonged exposure of skin to uncured sealant.
- Good ventilation is necessary for work and cure places.
Disclaimer
The information presented herein is offered in good faith and is believed to be accurate. However, because conditions and methods of using our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that our products are safe, effective, and fully satisfactory for intended specific applications.
About Us: